SEO
vBulletin Search Engine Optimization
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
02-28-2008, 04:54 PM
| ||||
| ||||
 HP printers Hi there ! Can anybody tell what's special about HP network printers? Even the Solaris man pages treat them in s special manner and indeed, I'm havong some trouble now. On an old E280R running Solaris 8, JetAdmin is installed and printing on a LJ4100 work perfectly. Now I have a V20z running Solaris 10 and printing to that HP work as long as I use the E280R as print server. I have configured a local printer on the V20z and it doesn't work. The funny thing is that when I configure it exactly the same way on the SPARC box (not using JetAdmin), it also works. It seems that some traffic arrives at the printer as it complains about paper mismatch. But I requested A4 which is definitely present. /etc/lp/printers/jet4100 looks like this: Banner: off Content types: postscript Device: /dev/null Interface: /usr/lib/lp/model/netstandard_foomatic Printer type: PS Modules: Options: dest=jet4100:9100,protocol=tcp and I also tried it without port 9100 Any ideas? fw      |
|
02-29-2008, 01:56 AM
| |||
| |||
| Re: HP printers In article <62o2o8F23vkteU1@mid.individual.net>, Frank Winkler <frank-usenet@kfw-family.org> wrote: > Hi there ! > > Can anybody tell what's special about HP network printers? Even the Solaris > man pages treat them in s special manner and indeed, I'm havong some > trouble now. > > On an old E280R running Solaris 8, JetAdmin is installed and printing on a > LJ4100 work perfectly. Now I have a V20z running Solaris 10 and printing to > that HP work as long as I use the E280R as print server. I have configured > a local printer on the V20z and it doesn't work. The funny thing is that > when I configure it exactly the same way on the SPARC box (not using > JetAdmin), it also works. > It seems that some traffic arrives at the printer as it complains about > paper mismatch. But I requested A4 which is definitely present. > > /etc/lp/printers/jet4100 looks like this: > > Banner: off > Content types: postscript > Device: /dev/null > Interface: /usr/lib/lp/model/netstandard_foomatic > Printer type: PS > Modules: > Options: dest=jet4100:9100,protocol=tcp > > and I also tried it without port 9100 > > Any ideas? > > fw I recall that Solaris uses the SVR4 printing system and the JetAdmin software to connect to the JetAdmin card on an HP printer. It uses hpnp to do that actual network connection and transfer the print file to the printer's queue. Prior to the transfer, it uses a special script that allows for formatting, tray control, etc. to prepend stuff to the print job. I don't know if CUPS or whatever is in use on Solaris now will work directly with a network-attached HP printer without JetAdmin. It seems your problems would show that it won't. You've currently got the printer setup to use the E280R as a print server so that print jobs spool through it. You want to print directly to the printer instead. Install the JetAdmin software and that might solve your problem. -- DeeDee, don't press that button! DeeDee! NO! Dee... |
|
02-29-2008, 01:29 PM
| |||
| |||
| Re: HP printers Frank Winkler <frank-usenet@kfw-family.org> writes: > >On an old E280R running Solaris 8, JetAdmin is installed and printing on a >LJ4100 work perfectly. Now I have a V20z running Solaris 10 and printing to >that HP work as long as I use the E280R as print server. I have configured >a local printer on the V20z and it doesn't work. The funny thing is that >when I configure it exactly the same way on the SPARC box (not using >JetAdmin), it also works. >It seems that some traffic arrives at the printer as it complains about >paper mismatch. But I requested A4 which is definitely present. > Sounds like the Jetdirect initializes the printer a little differently than the foomatic software on Solaris 10. -Greg -- Do NOT reply via e-mail. Reply in the newsgroup. |
|
02-29-2008, 01:29 PM
| |||
| |||
| Re: HP printers Greg Andrews wrote: >Sounds like the Jetdirect initializes the printer a little differently >than the foomatic software on Solaris 10. I think I found it now! It once configured the HP with a PPD file but later edited that file, replacing "Letter" by "A4". no changes in results. So I dumped the PPD out of the config file, no changes again. Yes, I restarted lpsched after each change. Now I found that after adding the printer, a separate copy of the (first) PPD is created in /etc/lp/ppd - now I edited that one, restarted lpsched and the printers works fine with A4 loaded. It's a little bit funny that the PPD location used on setup is only used once. Regards fw |
|
02-29-2008, 01:29 PM
| |||
| |||
| Re: HP printers Frank Winkler wrote: > Michael Vilain wrote: > > >to the printer instead. Install the JetAdmin software and that might > >solve your problem. > > I would if I knew why exactly it's necessary - and if it was available > for Solaris 10 on x64. > > Regards > > fw JetAdmin software is NOT "necessary". It just supplies a lot of stuff that you would otherwise have to write yourself! And ISTR that Solaris 10 (SPARC) just asked me to pick my printer, make and model, from a list of manufacturers and models which I did and it just worked!!!!! A long overdue enhancement IMHO. |
|
02-29-2008, 06:02 PM
| |||
| |||
| Re: HP printers On Feb 29, 8:01 am, Frank Winkler <frank-use...@kfw-family.org> wrote: > I would if I knew why exactly it's necessary - and if it was available for > Solaris 10 on x64. It is not as far as I know. You can make it work on S10/SPARC but there are no binaries for x86. |
|
03-01-2008, 11:19 AM
| ||||
| ||||
| Re: HP printers |
Linear Mode
