Hi Gurus

I have a problem in configuring Sun Storegde T3 with Sun fire v880
server.
we have qlc2200 Fc HBA to connect to T3
It behaves randomly i.e : sometimes when i do a probe in ok prompt it
shows the disks(vol in t3) .
after sometime it doesn't.
Likewise if i boot the solaris os and run format it takes more seconds
to show the t3 disks and also the status on disks as <formatting>..
then later this disks are also not seen in format utility.
The behaviour is random..
I applied the latest solaris pathes and SAN patches
I upgarde the t3 firmware also.
still i face this issues

can anyone help me to get-out of this circle..
thanks
velan

Am 22 Apr 2004 03:00:24 -0700 schrieb vadivelan:

Hi,

> we have qlc2200 Fc HBA to connect to T3
> It behaves randomly i.e : sometimes when i do a probe in ok prompt it
> shows the disks(vol in t3) .
> after sometime it doesn't.
> Likewise if i boot the solaris os and run format it takes more seconds
> to show the t3 disks and also the status on disks as <formatting>..

Do you have some messages (online/offline) under /var/adm/messages ?
Cables OK? FC-Plugs are ok and clean?

Regards (sorry for my english)