Hello,

i have a Problem with fibre channel card configuration on a FSC Primepower
650 with emulex fc cards (lpfc0, lpfc1). At every card i should see 4 path's
to an SAN Lun0. If i verify this with lputil, i can see all 8 path's. But
in the /dev/dsk i find only the 4 devices from the lpfc0.

I have checked /kernel/drv/sd.conf, /kernel/drv/lpfc.conf but didn't find
anything wrong.

What i can do, to see all the devices ?

Thanks

Marcel Pi wrote:
> Hello,
>
> i have a Problem with fibre channel card configuration on a FSC Primepower
> 650 with emulex fc cards (lpfc0, lpfc1). At every card i should see 4 path's
> to an SAN Lun0. If i verify this with lputil, i can see all 8 path's. But
> in the /dev/dsk i find only the 4 devices from the lpfc0.
>
> I have checked /kernel/drv/sd.conf, /kernel/drv/lpfc.conf but didn't find
> anything wrong.

A few suggestions :

Verify that the OS do see both cards.
compare /etc/path_to_inst on this machine and on another one
thats
working and check that both lpfc cards appear.

Check that both cards "signon" at system boot - Look in
/var/adm/messages

run "devfsadm -v" and verify what it does to the /dev tree.


Is the firmware revision the same on both cards ?
Firmware revision and Solaris lpfc driver version is interdependant.



//Lars