SEO

#1 (**permalink**) 01-16-2008, 03:33 PM

This is my first 3xxx drive. Sun came and replaced the failed drive
and it shows as scanned in the event log. No rebuild in progress. The
replaced drive shows as:

2(3) 27 68.37GB 200MB NONE USED SEAGATE ST373453FSUN72G
0449
S/N
WWNN 20000011C66B22CB

The array is configured as RAID 1. How do I get this to do a rebuild?
Sun support has no idea!!!

LD LD-ID Size Assigned Type Disks Spare Failed Status
------------------------------------------------------------------------
ld0 193BBE06 408.70GB Primary RAID1 11 0 1 Degraded
Write-Policy Default StripeSize 128KB

* disk-array

init-verify: disabled
rebuild-verify: disabled
normal-verify: disabled
rebuild-priority: low

Thanks
Gary Quiring

#2 (**permalink**) 01-16-2008, 03:34 PM

gquiring@gmail.com wrote:
> This is my first 3xxx drive. Sun came and replaced the failed drive
> and it shows as scanned in the event log. No rebuild in progress. The
> replaced drive shows as:
>
> 2(3) 27 68.37GB 200MB NONE USED SEAGATE ST373453FSUN72G
> 0449
> S/N
> WWNN 20000011C66B22CB
>
> The array is configured as RAID 1. How do I get this to do a rebuild?

Mark the drive as a hot spare. Within a few seconds the array will
automatically start the rebuild.

Scott

#3 (**permalink**) 01-16-2008, 03:34 PM

> Mark the drive as a hot spare. Within a few seconds the array will
> automatically start the rebuild.
>
> Scott
Thanks, that worked.

Gary

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

3510 no hot spare, replaced drive no rebuild