AXI Board won't boot - maybe dead ??

I have two SUN AXI OEM Boards, which refuse to boot.
Both boxes are similar aged and
I have tried booting from cd /net or disk. But all
the time the boot process stops - I'm a little bit
confused concerning the diag output...
Maybe a AXI wizard could give me an advice. I have
installed the latest OBP, because one "dead after
reboot" happens after applying the latest patch-cluster....

Below the output from the console-server....
Thank you very much !!
Tobias



ok setenv diag-switch? true
diag-switch? = true
ok reset
Resetting ...

Software Power ON

@(#) SPARCengine(tm)Ultra(tm) AXi 3.10.13 SME created 2001/07/25
08:35
Enter Checking KB
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0004
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0004
Done
Clearing Memory...Done
MEM BASE = 0000.0000.3800.0000
MEM SIZE = 0000.0000.0800.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.26ec
PC= 00000000023
Decmressin ino Memoy Doe
Sie =0000000082f0
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
UltraSPARC-IIi Version 1.3 (E$=2 MB) 2-2 module
Advanced PCI Bridge Version 1.1
Probing Memory Group #0 32 + 32 : 64 Megabytes
Probing Memory Group #1 128 + 128 : 256 Megabytes
Probing Memory Group #2 32 + 32 : 64 Megabytes
Probing Memory Group #3 128 + 128 : 256 Megabytes
Environmental monitoring: Disabled
Attempting to Turn 1st Optional Fan On ..... Done
Attempting to Turn 2nd Optional Fan On ..... Done

Probing Floppy: drive detected on ID0
Probing UPA Slot at 1e,0 Nothing There
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1,1 at Device 3 ATY,3DCHARGER
Probing /pci@1f,0/pci@1,1 at Device 4 Nothing there
Probing /pci@1f,0/pci@1 at Device 1 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 2 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1 at Device 4 Nothing there
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 333MHz), No Keyboard
OpenBoot 3.10.13 SME, 640 MB memory installed, Serial #10424972.
Ethernet address 8:0:20:9f:12:8c, Host ID: 809f128c.



Boot device: disk File and args:
Drive not ready
Evaluating: boot

Can't open boot device

ok Hardware Power ON

@(#) SPARCengine(tm)Ultra(tm) AXi 3.10.13 SME created 2001/07/25
08:35
Probing for keyboard entry to skip POST
Enter Checking KB
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB Done
%o0 = 0000.0000.0000.4001

Executing Power On SelfTest


SPARCengine(tm)Ultra(tm) AXi POST 1.11 SME Dated/03/17/99
Turning on the Optional Fans

Probing system keyboard : Done
Time Stamp [hour:min:sec] 10:23:01

Init POST BSS
Init System BSS
DMMU TLB Tags
DMMU TLB Tag Access Test
DMMU TLB RAM
DMMU TLB RAM Access Test
Ecache Tests
Probe Ecache
ecache_size = 0x00200000
Ecache RAM Addr Test
Ecache Tag Addr Test
Ecache RAM Test

telnet> send break
Ecache Tag Test
Invalidate Ecache Tags
All CPU Basic Tests
V9 Instruction Test
CPU Tick and Tick Compare Reg Test
CPU Soft Trap Test
CPU Softint Reg and Int Test
All Basic MMU Tests
DMMU Primary Context Reg Test
DMMU Secondary Context Reg Test
DMMU TSB Reg Test
DMMU Tag Access Reg Test
DMMU VA Watchpoint Reg Test
DMMU PA Watchpoint Reg Test
IMMU TSB Reg Test
IMMU Tag Access Reg Test
IMMU TLB RAM Access Test
IMMU TLB Tag Access Test
All Basic Cache Tests
Dcache RAM Test
Dcache Tag Test
Icache RAM Test
Icache Tag Test
Icache Next Test
Icache Predecode Test
Sabre MCU Control & Status Regs Init and Tests
Init Sabre MCU Control & Status Regs
CPU speed : 333 Mhz, mc1 set : 0x06459acb
Memory Probe and Init
Probe Memory
INFO: All the memory Group in 10 bit column mode
Group 0: 64MB
Group 1: 256MB
Group 2: 64MB
Group 3: 256MB
Malloc Post Memory
Init Post Memory
...........
Memory Addr w/ Ecache
Map PROM/STACK/NVRAM in DMMU
Load Post In Memory
Run POST from MEM
..........
loaded POST in memory
Update Master Stack/Frame Pointers
All FPU Basic Tests
FPU Regs Test
FPU State Reg Test
FPU Functional Test
FPU Trap Test
Memory Tests
Init Memory
........
................
.................
........
................
.................
Memory Addr w/ Ecache Test
ECC Memory Addr Test
Block Memory Addr Test
Block Memory Test
........
.......

.................
.................

.................
.................

.........
.........

.................
.................

.................
.................

ECC Blk Memory Test
.......
.......

.................
.................

.................
.................

.........
........

................
.................

.................
................

All Basic SabreIO Tests
Init SabreIO
PIO Decoder and BCT Test
PCI Byte Enable Test
SabreIO IOMMU Regs Test
Sabre IOMMU RAM NTA Test
Sabre IOMMU CAM NTA Test
Sabre IOMMU RAM Address Test

Sabre IOMMU CAM Address Test
IOMMU TLB Compare Test
IOMMU TLB Flush Test
PBM Control/Status Reg Test
PBM Diag Reg Test
Sabre IO Regs Test
All Advanced CPU Tests
DMMU Hit/Miss Test
DMMU Little Endian Test
IU ASI Access Test
FPU ASI Access Test
Ecache Thrash Test
All CPU Error Reporting Tests
CPU Addr Align Trap Test
DMMU Access Priv Page Test
DMMU Write Protected Page Test
All Advanced SabreIO Tests

Init SabreIO
Consist DMA Wr, IOMMU hit Ebus Test
All Basic Cheerio Tests
Cheerio Ebus PCI Config Space Test
Cheerio Ethernet PCI Config Space Test
Cheerio Ebus Engine Reg Test
Cheerio Init
All Basic Ras Tests
Init i2c bus
Thermister Reading Test
Thermister Position Readings (in Hex)
CPU 0x34
WARNING: CPU is
OverHeating.
Under Module 0x47
PCI 0x7a
Disk
0x58

Status of this POST run: PASS
manfacturing mode=OFF


Power On Selftest Completed
Software Power ON0.0000.0000.0000 ffff.ffff.f00d.3fe0
019f.3333.0a50.0011

@(#) SPARCengine(tm)Ultra(tm) AXi 3.10.13 SME created 2001/07/25
08:35
Enter Checking KB
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB

Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0004
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0004
Done
Clearing Memory...Done
MEM BASE = 0000.0000.3800.0000
MEM SIZE = 0000.0000.0800.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.26ec
PC = 000000000230
Siz = 0000000000.2f0one
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
UltraSPARC-IIi Version 1.3 (E$=2 MB) 2-2 module
Advanced PCI Bridge Version 1.1
Probing Memory Group #0 32 + 32 : 64 Megabytes
Probing Memory Group #1 128 + 128 : 256 Megabytes
Probing Memory Group #2 32 + 32 : 64 Megabytes
Probing Memory Group #3 128 + 128 : 256 Megabytes
Environmental monitoring: Disabled
Attempting to Turn 1st Optional Fan On ..... Done
Attempting to Turn 2nd Optional Fan On ..... Done

Probing Floppy: No drives detected
Probing UPA Slot at 1e,0 Nothing There
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1,1 at Device 3 ATY,3DCHARGER
Probing /pci@1f,0/pci@1,1 at Device 4 Nothing there
Probing /pci@1f,0/pci@1 at Device 1 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 2 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1 at Device 4 Nothing there
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 333MHz), No Keyboard
OpenBoot 3.10.13 SME, 640 MB memory installed, Serial #10424972.
Ethernet address 8:0:20:9f:12:8c, Host ID: 809f128c.



Boot device: disk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.11 97/07/10 16:19:15.
Loading: /platform/SUNW,UltraSPARC-IIi-Engine/ufsboot
Loading: /platform/sun4u/ufsboot
SunOS Release 5.8 Version Generic_108528-27 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
WARNING: forceload of misc/md_sp failed

########STOP##############
# Next test
telnet> send break
Type 'go' to resume
ok boot -v -r -s
Resetting ...

Software Power ON

@(#) SPARCengine(tm)Ultra(tm) AXi 3.10.13 SME created 2001/07/25
08:35
Enter Checking KB
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0004
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0110
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0004
Done
Clearing Memory...Done
MEM BASE = 0000.0000.3800.0000
MEM SIZE = 0000.0000.0800.0000
MMUs ON
Copy Done
PC = 000000.000.270.26ec
Dcmprssig ino MeoryDone
Sie = 00.000082f
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
UltraSPARC-IIi Version 1.3 (E$=2 MB) 2-2 module
Advanced PCI Bridge Version 1.1
Probing Memory Group #0 32 + 32 : 64 Megabytes
Probing Memory Group #1 128 + 128 : 256 Megabytes
Probing Memory Group #2 32 + 32 : 64 Megabytes
Probing Memory Group #3 128 + 128 : 256 Megabytes
Environmental monitoring: Disabled
Attempting to Turn 1st Optional Fan On ..... Done
Attempting to Turn 2nd Optional Fan On ..... Done

Probing Floppy: No drives detected
Probing UPA Slot at 1e,0 Nothing There
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1,1 at Device 3 ATY,3DCHARGER
Probing /pci@1f,0/pci@1,1 at Device 4 Nothing there
Probing /pci@1f,0/pci@1 at Device 1 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 2 scsi disk tape scsi disk tape
Probing /pci@1f,0/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1 at Device 4 Nothing there
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 333MHz), No Keyboard
OpenBoot 3.10.13 SME, 640 MB memory installed, Serial #10424972.
Ethernet address 8:0:20:9f:12:8c, Host ID: 809f128c.



Executing last command: boot -v -r -s
Boot device: /pci@1f,0/pci@1/scsi@1/disk@0,0 File and args: -v -r -s
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.11 97/07/10 16:19:15.
Loading: /platform/SUNW,UltraSPARC-IIi-Engine/ufsboot
Loading: /platform/sun4u/ufsboot
Size: 350256+90666+76986 Bytes
SunOS Release 5.8 Version Generic_108528-27 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Ethernet address = 8:0:20:9f:12:8c
mem = 655360K (0x28000000)
avail mem = 636338176
root nexus = SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 333MHz)
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1, simba1
simba1 is /pci@1f,0/pci@1
/pci@1f,0/pci@1/scsi@1 (glm0):
Rev. 5 Symbios 53c875 found.
PCI-device: scsi@1, glm0
glm0 is /pci@1f,0/pci@1/scsi@1
/pci@1f,0/pci@1/scsi@1,1 (glm1):
Rev. 5 Symbios 53c875 found.
PCI-device: scsi@1,1, glm1
glm1 is /pci@1f,0/pci@1/scsi@1,1
/pci@1f,0/pci@1/scsi@2 (glm2):
Rev. 5 Symbios 53c875 found.
PCI-device: scsi@2, glm2
glm2 is /pci@1f,0/pci@1/scsi@2
/pci@1f,0/pci@1/scsi@2,1 (glm3):
Rev. 5 Symbios 53c875 found.
PCI-device: scsi@2,1, glm3
glm3 is /pci@1f,0/pci@1/scsi@2,1
sd0 at glm0: target 0 lun 0
sd0 is /pci@1f,0/pci@1/scsi@1/sd@0,0
<IBM-DDRS-34560W-S97B cyl 8186 alt 2 hd 5 sec 218>
sd2 at glm0: target 2 lun 0
sd2 is /pci@1f,0/pci@1/scsi@1/sd@2,0
<IBM-DDRS-34560W-S97B cyl 8186 alt 2 hd 5 sec 218>
root on /pseudo/md@0:0,0,blk fstype ufs
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
PCI-device: pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
PCI-device: ebus@1, ebus0
su_pnp0 at ebus0: offset 14,3803f8
su_pnp0 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3803f8
su_pnp1 at ebus0: offset 14,3602f8
su_pnp1 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3602f8
se0 at ebus0: offset 14,400000
se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000

#####################################

Tobias wrote:
> I have two SUN AXI OEM Boards, which refuse to boot.
> Both boxes are similar aged and
> I have tried booting from cd /net or disk. But all
> the time the boot process stops - I'm a little bit
> confused concerning the diag output...
> Maybe a AXI wizard could give me an advice. I have
> installed the latest OBP, because one "dead after
> reboot" happens after applying the latest patch-cluster....
>
> Below the output from the console-server....
> Thank you very much !!
> Tobias
>
>
>
<snip>
>
>
> Boot device: disk File and args:
> Drive not ready
> Evaluating: boot
>
> Can't open boot device

That seems fairly clear

>
> ok Hardware Power ON
>
>

<snip>
> telnet> send break
> Type 'go' to resume
> ok boot -v -r -s
> Resetting ...
>
<snip>
>
> Executing last command: boot -v -r -s
> Boot device: /pci@1f,0/pci@1/scsi@1/disk@0,0 File and args: -v -r -s
> Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> FCode UFS Reader 1.11 97/07/10 16:19:15.
> Loading: /platform/SUNW,UltraSPARC-IIi-Engine/ufsboot
> Loading: /platform/sun4u/ufsboot
> Size: 350256+90666+76986 Bytes
> SunOS Release 5.8 Version Generic_108528-27 64-bit
> Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
> Ethernet address = 8:0:20:9f:12:8c
> mem = 655360K (0x28000000)
> avail mem = 636338176
> root nexus = SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 333MHz)
> pcipsy0 at root: UPA 0x1f 0x0
> pcipsy0 is /pci@1f,0
> PCI-device: pci@1, simba1
> simba1 is /pci@1f,0/pci@1
> /pci@1f,0/pci@1/scsi@1 (glm0):
> Rev. 5 Symbios 53c875 found.
> PCI-device: scsi@1, glm0
> glm0 is /pci@1f,0/pci@1/scsi@1
> /pci@1f,0/pci@1/scsi@1,1 (glm1):
> Rev. 5 Symbios 53c875 found.
> PCI-device: scsi@1,1, glm1
> glm1 is /pci@1f,0/pci@1/scsi@1,1
> /pci@1f,0/pci@1/scsi@2 (glm2):
> Rev. 5 Symbios 53c875 found.
> PCI-device: scsi@2, glm2
> glm2 is /pci@1f,0/pci@1/scsi@2
> /pci@1f,0/pci@1/scsi@2,1 (glm3):
> Rev. 5 Symbios 53c875 found.
> PCI-device: scsi@2,1, glm3
> glm3 is /pci@1f,0/pci@1/scsi@2,1
> sd0 at glm0: target 0 lun 0
> sd0 is /pci@1f,0/pci@1/scsi@1/sd@0,0
> <IBM-DDRS-34560W-S97B cyl 8186 alt 2 hd 5 sec 218>
> sd2 at glm0: target 2 lun 0
> sd2 is /pci@1f,0/pci@1/scsi@1/sd@2,0
> <IBM-DDRS-34560W-S97B cyl 8186 alt 2 hd 5 sec 218>
> root on /pseudo/md@0:0,0,blk fstype ufs
> WARNING: forceload of misc/md_trans failed
> WARNING: forceload of misc/md_hotspares failed
> WARNING: forceload of misc/md_sp failed
> PCI-device: pci@1,1, simba0
> simba0 is /pci@1f,0/pci@1,1
> PCI-device: ebus@1, ebus0
> su_pnp0 at ebus0: offset 14,3803f8
> su_pnp0 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3803f8
> su_pnp1 at ebus0: offset 14,3602f8
> su_pnp1 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3602f8
> se0 at ebus0: offset 14,400000
> se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000
>
> #####################################

So what's the problem? It looks like it's on its way.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...@prodigy.net.

CJT <abujlehc@prodigy.net> wrote in message news:<416FE082.4020108@prodigy.net>...
> Tobias wrote:
> > I have two SUN AXI OEM Boards, which refuse to boot.
> > Both boxes are similar aged and
> > I have tried booting from cd /net or disk. But all
> > the time the boot process stops - I'm a little bit
> > confused concerning the diag output...
> > Maybe a AXI wizard could give me an advice. I have
> > installed the latest OBP, because one "dead after
> > reboot" happens after applying the latest patch-cluster....
> >
> > Below the output from the console-server....
> > Thank you very much !!
> > Tobias
> >
> >
> >
> <snip>
> >
> >
> > Boot device: disk File and args:
> > Drive not ready
> > Evaluating: boot
> >
> > Can't open boot device
>
> That seems fairly clear
>
> >
> > ok Hardware Power ON
> >
> >
>
> <snip>
> > telnet> send break
> > Type 'go' to resume
> > ok boot -v -r -s
> > Resetting ...
> >
> <snip>
> >
> > Executing last command: boot -v -r -s
> > Boot device: /pci@1f,0/pci@1/scsi@1/disk@0,0 File and args: -v -r -s
> > Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> > FCode UFS Reader 1.11 97/07/10 16:19:15.
> > Loading: /platform/SUNW,UltraSPARC-IIi-Engine/ufsboot
> > Loading: /platform/sun4u/ufsboot
> > Size: 350256+90666+76986 Bytes
> > SunOS Release 5.8 Version Generic_108528-27 64-bit
> > Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
> > Ethernet address = 8:0:20:9f:12:8c
> > mem = 655360K (0x28000000)
> > avail mem = 636338176
> > root nexus = SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 333MHz)
> > pcipsy0 at root: UPA 0x1f 0x0
> > pcipsy0 is /pci@1f,0
> > PCI-device: pci@1, simba1
> > simba1 is /pci@1f,0/pci@1
> > /pci@1f,0/pci@1/scsi@1 (glm0):
> > Rev. 5 Symbios 53c875 found.
> > PCI-device: scsi@1, glm0
> > glm0 is /pci@1f,0/pci@1/scsi@1
> > /pci@1f,0/pci@1/scsi@1,1 (glm1):
> > Rev. 5 Symbios 53c875 found.
> > PCI-device: scsi@1,1, glm1
> > glm1 is /pci@1f,0/pci@1/scsi@1,1
> > /pci@1f,0/pci@1/scsi@2 (glm2):
> > Rev. 5 Symbios 53c875 found.
> > PCI-device: scsi@2, glm2
> > glm2 is /pci@1f,0/pci@1/scsi@2
> > /pci@1f,0/pci@1/scsi@2,1 (glm3):
> > Rev. 5 Symbios 53c875 found.
> > PCI-device: scsi@2,1, glm3
> > glm3 is /pci@1f,0/pci@1/scsi@2,1
> > sd0 at glm0: target 0 lun 0
> > sd0 is /pci@1f,0/pci@1/scsi@1/sd@0,0
> > <IBM-DDRS-34560W-S97B cyl 8186 alt 2 hd 5 sec 218>
> > sd2 at glm0: target 2 lun 0
> > sd2 is /pci@1f,0/pci@1/scsi@1/sd@2,0
> > <IBM-DDRS-34560W-S97B cyl 8186 alt 2 hd 5 sec 218>
> > root on /pseudo/md@0:0,0,blk fstype ufs
> > WARNING: forceload of misc/md_trans failed
> > WARNING: forceload of misc/md_hotspares failed
> > WARNING: forceload of misc/md_sp failed
> > PCI-device: pci@1,1, simba0
> > simba0 is /pci@1f,0/pci@1,1
> > PCI-device: ebus@1, ebus0
> > su_pnp0 at ebus0: offset 14,3803f8
> > su_pnp0 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3803f8
> > su_pnp1 at ebus0: offset 14,3602f8
> > su_pnp1 is /pci@1f,0/pci@1,1/ebus@1/su_pnp@14,3602f8
> > se0 at ebus0: offset 14,400000
> > se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000
> >
> > #####################################
>
> So what's the problem? It looks like it's on its way.

The problem is that the box won't boot, I have tried
to boot from a jumpstart, via cdrom or from previous working
disks ....but it always stop short after the copyright message.....
So I'm little bit lost...at the moment.....
I will try to replace the mothorboard in the next days, but my hope
was to get some insight from the diag output ;-(((

Thanks again
Tobias