SEO
vBulletin Search Engine Optimization
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
01-16-2008, 03:32 PM
| ||||
| ||||
 Sleepy ALOM on a T2000 Greets I have this T2000 that as if by magic today is putting out characters at about 50 baud. An ls takes what seems like minutes to complete. This is on the RCS console ether connection. One minute it was working fine then the characters turned into molasses in January! I have 3 others that do not do this and Ive tried several incantations with sc > to make it revert to 9600 baud but no go. reboots etc you name it. Think I tried everything. I should clarify that this only occurs when I type "console". Within the sc realm itself characters behave normally. I had a look at running processes on the broken box and nothing stands out - same as the working machines. Any ideas on what might do this or how to set things back to square one? Some things require ALOM or serial console. Right now it cant be used! Thanks for any tips      |
|
01-16-2008, 03:32 PM
| ||||
| ||||
| Re: Sleepy ALOM on a T2000 gerryt@ wrote: > I have this T2000 that as if by magic today is putting out > characters at about 50 baud. An ls takes what seems like minutes > to complete. This is on the RCS console ether connection. > One minute it was working fine then the characters turned into > molasses in January! > I have 3 others that do not do this and Ive tried several > incantations with sc > to make it revert to 9600 baud > but no go. reboots etc you name it. Think I tried everything. > I should clarify that this only occurs when I type "console". > Within the sc realm itself characters behave normally. > I had a look at running processes on the broken box and > nothing stands out - same as the working machines. > Any ideas on what might do this or how to set things > back to square one? > Some things require ALOM or serial console. Right now > it cant be used! Hmm no Scott Howard to the rescue huh? Guess Ill follow up to myself. I sussed it out by doing the following things: init 0 poweroff Yank the power cords wait a minute, plug in the cords, press the front panel start button. console behaves normally. |
Linear Mode
