SEO

#1 (**permalink**) 01-16-2008, 04:03 PM

i have sol8, in E250 system, my problem is when i gave ip address to
hme0 interface it is runnig correctly, it is in /etc/hosts in addition,
but when i gave init 6 to system
i coulf not see ip address, so i can not establish connection system,
only after igave ip manually by means of ifconfig it it running, there
is /etc/hostname.hme0 file that includes in hostname. what sould i do
to solve this IP problem, i want to be able to connect my system after
restart , without again giving ip .

Regards
Ali

#2 (**permalink**) 01-16-2008, 04:03 PM

hostname > /etc/hostname.hme0
should solve the problem you reported.

///Arjun
alielmali78@gmail.com wrote:
> i have sol8, in E250 system, my problem is when i gave ip address to
> hme0 interface it is runnig correctly, it is in /etc/hosts in addition,
> but when i gave init 6 to system
> i coulf not see ip address, so i can not establish connection system,
> only after igave ip manually by means of ifconfig it it running, there
> is /etc/hostname.hme0 file that includes in hostname. what sould i do
> to solve this IP problem, i want to be able to connect my system after
> restart , without again giving ip .
>
> Regards
> Ali

#3 (**permalink**) 01-16-2008, 04:03 PM

Sorry -- I didnt notice earlier that you already have that fixed.

You could check if your /etc/nsswitch.conf has 'files' (i.e first
files and then dns) for hosts.
----
Arjun.

koneruarjun@gmail.com wrote:
> hostname > /etc/hostname.hme0
> should solve the problem you reported.
>
> ///Arjun
> alielmali78@gmail.com wrote:
> > i have sol8, in E250 system, my problem is when i gave ip address to
> > hme0 interface it is runnig correctly, it is in /etc/hosts in addition,
> > but when i gave init 6 to system
> > i coulf not see ip address, so i can not establish connection system,
> > only after igave ip manually by means of ifconfig it it running, there
> > is /etc/hostname.hme0 file that includes in hostname. what sould i do
> > to solve this IP problem, i want to be able to connect my system after
> > restart , without again giving ip .
> >
> > Regards
> > Ali

#4 (**permalink**) 01-16-2008, 04:03 PM

Hi
Below, there is my /etc/nsswitch.conf but i match another system's
nsswitch.conf file
it is same, other system is running but my system is not. what should i
change?
Thank you
Ali
#
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet"
transports.

passwd: files
group: files
hosts: files
ipnodes: files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
# At present there isn't a 'files' backend for netgroup; the system
will
# figure it out pretty quickly, and won't use netgroups at all.
netgroup: files
automount: files
aliases: files
services: files
sendmailvars: files
printers: user files

auth_attr: files
prof_attr: files
project: files

#5 (**permalink**) 01-16-2008, 04:03 PM

alielmali78@gmail.com <alielmali78@gmail.com> wrote:
> i have sol8, in E250 system, my problem is when i gave ip address to
> hme0 interface it is runnig correctly, it is in /etc/hosts in addition,
> but when i gave init 6 to system
> i coulf not see ip address, so i can not establish connection system,
> only after igave ip manually by means of ifconfig it it running, there
> is /etc/hostname.hme0 file that includes in hostname. what sould i do
> to solve this IP problem, i want to be able to connect my system after
> restart , without again giving ip .

What exactly is the contents of /etc/hostname.hme0?
What does 'ifconfig -a' look like after reboot?
Are there any warnings or errors on the console during boot?

--
Darren Dunham ddunham@taos.com
Senior Technical Consultant TAOS http://www.taos.com/
Got some Dr Pepper? San Francisco, CA bay area
< This line left intentionally blank to confuse you. >

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

Sol8 ip problem