SEO
vBulletin Search Engine Optimization
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
01-16-2008, 03:30 PM
| ||||
| ||||
 Ultra2 Processor choices I have an Ultra2 with a couple of 296MHz processors. I also have a few Ultra SparcII 360MHz and a couple of 400MHz processors hanging around. I have not yet found any reference for a jumper setting that might allow me to use either in the Ultra2. I guess my question is, is 296MHz as high as I can go in the Ultra2?      |
|
01-16-2008, 03:30 PM
| |||
| |||
| Re: Ultra2 Processor choices On Thu, 25 May 2006, Gerry Sinkiewicz wrote: > I guess my question is, is 296MHz as high as I can go in the Ultra2? Nope, that would be 400 MHz. -- Rich Teer, SCNA, SCSA, OpenSolaris CAB member President, Rite Online Inc. Voice: +1 (250) 979-1638 URL: http://www.rite-group.com/rich |
|
01-16-2008, 03:31 PM
| |||
| |||
| Re: Ultra2 Processor choices "Rich Teer" <rich.teer@rite-group.com> wrote in message news:Pine.SOL.4.64.0605251355540.23396@marrakesh.. . > On Thu, 25 May 2006, Gerry Sinkiewicz wrote: > > > I guess my question is, is 296MHz as high as I can go in the Ultra2? > > Nope, that would be 400 MHz. > > -- > Rich Teer, SCNA, SCSA, OpenSolaris CAB member > > President, > Rite Online Inc. > > Voice: +1 (250) 979-1638 > URL: http://www.rite-group.com/rich > Thanks, I was hoping I was wrong. There must be some 2MB 400MHz UltraSparcII's that will fit in the Ultra2 slots. The 400MHz cpus I have are the 4MB ecache guys and the heatsink on the back makes them too thick to fit in the backmost slot. |
|
01-16-2008, 03:31 PM
| ||||
| ||||
| Re: Ultra2 Processor choices Gerry Sinkiewicz <sinkiege@snet.net> wrote: > Thanks, I was hoping I was wrong. > There must be some 2MB 400MHz UltraSparcII's that will fit in the Ultra2 > slots. > The 400MHz cpus I have are the 4MB ecache guys and the heatsink on the back > makes them too thick to fit in the backmost slot. You also need to worry about the revision of the system board. IIRC, only the newest revision supports the 400Mhz CPU's. U2's with dual 400's are very nice systems, I used to support several of them. Zane |
Linear Mode
