SEO
vBulletin Search Engine Optimization
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
01-16-2008, 03:27 PM
| ||||
| ||||
 Ultra60 won't flash So, I've got this Ultra60. It's running OBP 3.11, and I wan to upgrade that to the latest fw. I download patch 106455-11, copy the flash-update-Ultra60-latest file to "/" on the system, make sure that it is mode 755, and turn off the system. I set the jumper to write-enable, and power back on. I stop the system at "ok", and enter "boot disk /flash-update-Ultra60-latest", just like the README in the patch dir says. The system resets, and hangs. No boot, no flash menu, nada. Any ideas? Much obliged, -Jeff A.      |
|
01-16-2008, 03:27 PM
| |||
| |||
| Re: Ultra60 won't flash "E. Howard Hunt" <jeff@lenin.net> wrote in message news:e3rdgi$2lfa$1@news1.ucsd.edu... > So, I've got this Ultra60. It's running OBP 3.11, and I wan to upgrade > that > to the latest fw. I download patch 106455-11, copy the > flash-update-Ultra60-latest file to "/" on the system, make sure that it > is > mode 755, and turn off the system. I set the jumper to write-enable, and > power back on. I stop the system at "ok", and enter "boot disk > /flash-update-Ultra60-latest", just like the README in the patch dir says. > The system resets, and hangs. No boot, no flash menu, nada. Any ideas? > > Much obliged, > > -Jeff A. > Maybe youre systems boots from a different alias than disk? Look at you default boot-list with print-env. Or you could reset all your obp settings with set-defaults. (with the risk of not being able to boot at all)  ButI usually reset the OBP settings before and after flashing Marc |
|
01-16-2008, 03:27 PM
| ||||
| ||||
| Re: Ultra60 won't flash E. Howard Hunt wrote: > So, I've got this Ultra60. It's running OBP 3.11, and I wan to upgrade that > to the latest fw. I download patch 106455-11, copy the > flash-update-Ultra60-latest file to "/" on the system, make sure that it is > mode 755, and turn off the system. I set the jumper to write-enable, and > power back on. I stop the system at "ok", and enter "boot disk > /flash-update-Ultra60-latest", just like the README in the patch dir says. > The system resets, and hangs. No boot, no flash menu, nada. Any ideas? > > Much obliged, > > -Jeff A. > I had this issue just yesterday. I put the flash image on a boot server and did a 'boot net'. This worked great. Now my Ultra 60 has the latest OBP and POST release. HTH, Tom |
Linear Mode
