SEO

#1 (**permalink**) 01-16-2008, 05:59 PM

Hi all. I'm trying to put a vt100 terminal on a K360 server I
inherited. And it appears that the term type has been set to hpterm.
So I tried to go into GSP to change this to vt100. But when I do a
[ctrl]-B nothing happens. There is also no GSP reset button that I can
find.

So now I'm wondering if there is alternative way of accessing GSP on a
K-class server; or if it uses something different from GSP; or if this
may be indicative of some other problem. Of course I haven't been able
to find anything of use at docs.hp.com or at the ITRC. Anyone have any
ideas?

#2 (**permalink**) 01-16-2008, 05:59 PM

Hi Kyle,

There is no GSP on K class HP9000 servers.

I do not have terminal and I usually use laptop and terminal emulation
program eg. Reflection for connection to K-class, but I think that
Hyperterminal should also works. Terminal type hpterm works correctly.

Maybe, you can try to reset your terminal setup. I think that default value
is "hp", but I am not sure. As far as I can remember you should hold Ctrl+D
for 10 seconds. Please someone correct me, if I am wrong.

HTH,
Mario.

"Kyle Barton" <kyle.barton@asg.com> wrote in message
news:34dde80f.0404280720.49344c0c@posting.google.c om...
> Hi all. I'm trying to put a vt100 terminal on a K360 server I
> inherited. And it appears that the term type has been set to hpterm.
> So I tried to go into GSP to change this to vt100. But when I do a
> [ctrl]-B nothing happens. There is also no GSP reset button that I can
> find.
>
> So now I'm wondering if there is alternative way of accessing GSP on a
> K-class server; or if it uses something different from GSP; or if this
> may be indicative of some other problem. Of course I haven't been able
> to find anything of use at docs.hp.com or at the ITRC. Anyone have any
> ideas?

#3 (**permalink**) 01-16-2008, 05:59 PM

> Hi all. I'm trying to put a vt100 terminal on a K360 server I
> inherited. And it appears that the term type has been set to hpterm.
> So I tried to go into GSP to change this to vt100. But when I do a
> [ctrl]-B nothing happens. There is also no GSP reset button that I can
> find.
Hi,
CM> prompt is obtained with CTRL-B only if the front panel key is on
"service" position.
There is no gsp reset button on K class.

#4 (**permalink**) 01-16-2008, 05:59 PM

"Mario" <mario.jaksic@zg.tel.hr> wrote in message
news:c6oo66$4e3$1@ls219.htnet.hr...
> Hi Kyle,
>
> There is no GSP on K class HP9000 servers.
>
> I do not have terminal and I usually use laptop and terminal emulation
> program eg. Reflection for connection to K-class, but I think that
> Hyperterminal should also works. Terminal type hpterm works correctly.
>
> Maybe, you can try to reset your terminal setup. I think that default
value
> is "hp", but I am not sure. As far as I can remember you should hold
Ctrl+D
> for 10 seconds. Please someone correct me, if I am wrong.

No, just press D during power-on and wait for the beep, when you release
you'll see the message that the terminal is in default configuration.

Grtzzz,

Sander

#5 (**permalink**) 01-16-2008, 05:59 PM

"Sarah Connor" <abc@abc.com> wrote in message news:<408ff6c2$0$21491$a0ced6e1@news.skynet.be>...
> > Hi all. I'm trying to put a vt100 terminal on a K360 server I
> > inherited. And it appears that the term type has been set to hpterm.
> > So I tried to go into GSP to change this to vt100. But when I do a
> > [ctrl]-B nothing happens. There is also no GSP reset button that I can
> > find.
> Hi,
> CM> prompt is obtained with CTRL-B only if the front panel key is on
> "service" position.
> There is no gsp reset button on K class.

Thanks Sarah (and Mario) for the ideas. I was able to do exactly what I needed to.

#6 (**permalink**) 01-16-2008, 05:59 PM

Thanks Sander,

my memory is not so good these days

).

Regards,
Mario.

> No, just press D during power-on and wait for the beep, when you release
> you'll see the message that the terminal is in default configuration.
>
> Grtzzz,
>
> Sander

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

Accessing GSP on a K360