SEO

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

-----------------------------------------------------------------
**REVISED 02**
Source: HEWLETT-PACKARD COMPANY
SECURITY BULLETIN: HPSBUX0303-248
Originally issued: 17 March 2003
Last revised: 3 November 2003
SSRT3521 (Rev. 2) OpenSSL CBC timing attack in SSL and TLS
-----------------------------------------------------------------
NOTICE: There are no restrictions for distribution of this
Bulletin provided that it remains complete and intact.

The information in the following Security Bulletin should be
acted upon as soon as possible. Hewlett-Packard Company will
not be liable for any consequences to any customer resulting
from customer's failure to fully implement instructions in this
Security Bulletin as soon as possible.

-----------------------------------------------------------------
PROBLEM: Potential vulnerability regarding ssl3_get_record in
s3_pkt.c for OpenSSL before 0.9.7a and 0.9.6 before
0.9.6i does not perform a MAC computation if an incorrect
block cipher padding is used, which causes an information
leak (timing discrepancy) that may make it easier to
launch cryptographic attacks that rely on distinguishing
between padding and MAC verification errors, possibly
leading to extraction of the original plaintext, aka the
"Vaudenay timing attack."

More details are available at:
<http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2003-0078>

IMPACT: Potential information leak.

**REVISED 02**
PLATFORM: HP9000 Servers running HP-UX release B.11.00, B.11.11,
B.11.20, and B.11.22 with versions of the following
products are affected, and represented as:
product-name, version (product-tag/bundle-tag)

- hp apache-based web server, 1.3.27.00 or earlier
(ApacheStrong/B9415AA)
This product includes OpenSSL 0.9.6g.

- hp apache-based web server, 2.0.43.00 or earlier
(HPApache/B9416AA, HPApache/B9416BA)
This product includes OpenSSL 0.9.6g

- hp-ux apache-based web server, v.1.0.00.01 or earlier
(hpuxwsAPACHE/hpuxwsApache)
This product includes OpenSSL 0.9.6g.

-->> HP9000 Servers running HP-UX release 11.04 (VVOS)
-->> with Virtualvault A.04.50 or Virtualvault A.04.60
-->> installed.

**REVISED 02**
SOLUTION: For HP-UX releases B.11.00, B.11.11, B.11.20 and
B.11.22 download new HP Apache product from
<http://www.software.hp.com/>:

For ApacheStrong/B9415AA download the following:
- hp apache-based web server, 1.3.27.01 or later
(ApacheStrong/B9415AA)
This product includes OpenSSL 0.9.6i.
<http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/
cgi/displayProductInfo.pl?productNumber=B9415AA132701>

For HPApache/B9416AA, HPApache/B9416BA and
hpuxwsAPACHE/hpuxwsApache download the following:
- hp-ux apache-based web server, v.1.0.01.01 or later
(hpuxwsAPACHE/hpuxwsApache)
This product includes OpenSSL 0.9.6i.
<http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/
cgi/displayProductInfo.pl?productNumber=HPUXWSSUITE>

NOTE: The IPv6 solution is now available. Please refer to
documentation and depot's available from software.hp.com
Click on "internet ready and networking"
and look for "hp-ux apache-based web server
v.1.0.07.01 for ipv6 powered by apache, tomcat, webmin.

-->> For HP-UX B.11.04 Virtualvault releases install
-->> recommended patches upgrading to OpenSSL version 0.9.6j.
-->> Virtualvault 4.5:
-->> PHSS_28685 11.04 Virtualvault 4.5 OWS update
-->> Virtualvault 4.6:
-->> PHSS_28686 11.04 Virtualvault 4.6 OWS update

**REVISED 02**
MANUAL ACTIONS: Yes - Update
Install the product containing the fix.
For customers with HPApache/B9416AA or
HPApache/B9416BA installed, the fix requires
migration to hpuxwsAPACHE/hpuxwsApache and
removing the affected products from the system.

-->> For customers with Virtualvault 4.5/4.6 - none
**REVISED 02**
AVAILABILITY: Complete product bundles are available now on
<http://www.software.hp.com/>

-->> For Virtualvault patches go to <itrc.hp.com>.

CHANGE SUMMARY: Rev.01 added IPv6 information
Rev.02 added VVOS OWS patch information,
updated Affected versions.
-----------------------------------------------------------------

**REVISED 02**
A. Background
The Common Vulnerabilities and Exposures project
<http://cve.mitre.org/> has identified multiple potential
vulnerabilities in the OpenSSL (CAN-2003-0078). It affects the
following HP product numbers/versions on HP-UX releases
B.11.00, B.11.04, B.11.11, B.11.20 and B.11.22:

- hp apache-based web server, 1.3.27.00 or earlier
(ApacheStrong/B9415AA)

- hp apache-based web server, 2.0.43.00 or earlier
(HPApache/B9416AA, HPApache/B9416BA)

- hp-ux apache-based web server, v.1.0.00.01 or earlier
(hpuxwsAPACHE/hpuxwsApache)

-->> AFFECTED VERSIONS

-->> HP-UX B.11.00
-->> HP-UX B.11.11
-->> HP-UX B.11.20
-->> HP-UX B.11.22
-->> ====================================
-->> HPApache.APACHE2
-->> hpuxwsAPACHE.APACHE2
-->> fix: install hp-ux apache-based web server, v.1.0.01.01,
-->> or later.

-->> For HP-UX B.11.04 Virtualvault, the following is a list
-->> of affected filesets or patches and fix information.
-->> To determine if a system has an affected version,
-->> search the output of "swlist -a revision -l fileset"
-->> for an affected fileset or patch, then determine if
-->> a fixed revision or applicable patch is installed.

-->> HP-UX B.11.04
-->> =============
-->> Virtualvault A.04.50
-->> VaultWS.WS-CORE
-->> VaultTS.VV-IWS
-->> VaultTS.VV-IWS-JK
-->> VaultTS.VV-IWS-GUI
-->> VaultTS.VV-CORE-CMN
-->> VaultTS.VV-IWS-JAVA
-->> fix: install PHSS_28685 or subsequent

-->> Virtualvault A.04.60
-->> VaultWS.WS-CORE
-->> VaultTS.VV-CORE-CMN
-->> VaultTS.VV-IWS-JAVA
-->> VaultTS.VV-IWS-GUI
-->> fix: install PHSS_28686 or subsequent

-->> END AFFECTED VERSIONS

**REVISED 02**
B. Recommended solution
The OpenSSL Group has released OpenSSL 0.9.6i as the best known
version that fixes the problems identified in the above
mentioned issues.

For customers using ApacheStrong/B9415AA, HP has incorporated
OpenSSL 0.9.6i in the following product:
- hp apache-based web server 1.3.27.01 or later
<http://www.software.hp.com/cgi-bin/s...arser.cgi/cgi/
displayProductInfo.pl?productNumber=B9415AA132701>

For customers using HPApache/B9416AA, HPApache/B9416BA and
hpuxwsAPACHE/hpuxwsApache, HP has incorporated OpenSSL 0.9.6i
in the following product:
- hp-ux apache-based web server v.1.0.01.01 or later
<http://www.software.hp.com/cgi-bin/s...arser.cgi/cgi/
displayProductInfo.pl?productNumber=HPUXWSSUITE>

-->> For customers using HP-UX Virtualvault (B.11.04), upgrading
-->> to the OpenSSL version 0.9.6j or later via the patches
-->> PHSS_28685 or subsequent for Virtualvault 4.5:
-->> PHSS_28686 or subsequent for Virtualvault 4.6:
-->> fixes the timing based attack on the CBC cipher suites in
-->> SSL and TLS.

NOTE: The IPv6 solution is now available. Please refer to
documentation and depot's available from software.hp.com
Click on "internet ready and networking"
and look for "hp-ux apache-based web server
v.1.0.07.01 for ipv6 powered by apache, tomcat, webmin.

Check for Apache Installation
-----------------------------
To determine if the Apache web server from HP is installed on
your system, use Software Distributor's swlist command. All
three versions products may co-exist on a single system.

For example, the results of the command
swlist -l product | grep -i apache

ApacheStrong 1.3.19.21 HP Apache-based Web Server
with Strong (128bit) Encryption
HPApache 2.0.39.01.02 HP Apache-based Web Server
hpuxwsAPACHE A.1.0.00.01 HP-UX Apache-based Web Server

Stop Apache
-----------------------------
Before updating, make sure to stop any previous Apache binary.
Otherwise, the previous binary will continue running,
preventing the new one from starting, although the installation
would be successful.

After determining which Apache is installed, stop Apache with
the following commands:

for ApacheStrong: /opt/apache/bin/apachectl stop
for HPApache: /opt/hpapache2/bin/apachectl stop
for hpuxwsAPACHE: /opt/hpws/apache/bin/apachectl stop

Download and Install Apache
-----------------------------
- Download Apache from Software Depot using the previously
mentioned links.
- Verify successful download by comparing the cksum with the
value specified on the installation web page.
- Use SD to swinstall the depot.
- For customers with HPApache/B9416AA or HPApache/B9416BA
installed, migrate to hpuxwsAPACHE/hpuxwsApache and
remove the affected products from the system.

Installation of this new version of HP Apache over an existing
HP Apache installation is supported, while installation over a
non-HP Apache is NOT supported.

Removing Apache Installation
----------------------------
If you rather remove Apache from your system than install a
newer version to resolve the security problem, use both
Software Distributor's "swremove" command and also "rm -rf" the
home location as specified in the rc.config.d file "HOME"
variables.

To find the files containing HOME variables in the
/etc/rc.config.d directory:

%ls /etc/rc.config.d | grep apache
apacheconf
hpapache2conf
hpws_apacheconf

NOTE: For HP Apache 1.3.x, you must also manually remove the
Tomcat directory. Tomcat is under directory
"/opt/tomcat" for HP Apache 1.3.x.


C. To subscribe to automatically receive future NEW HP Security
Bulletins from the HP IT Resource Center via electronic
mail, do the following:

Use your browser to get to the HP IT Resource Center page
at:

<http://itrc.hp.com>

Use the 'Login' tab at the left side of the screen to login
using your ID and password. Use your existing login or the
"Register" button at the left to create a login, in order to
gain access to many areas of the ITRC. Remember to save the
User ID assigned to you, and your password.

In the left most frame select "Maintenance and Support".

Under the "Notifications" section (near the bottom of
the page), select "Support Information Digests".

To -subscribe- to future HP Security Bulletins or other
Technical Digests, click the check box (in the left column)
for the appropriate digest and then click the "Update
Subscriptions" button at the bottom of the page.

or

To -review- bulletins already released, select the link
(in the middle column) for the appropriate digest.

NOTE: Using your itrc account security bulletins can be
found here:
<http://itrc.hp.com/cki/bin/doc.pl/screen=ckiSecurityBulletin>


To -gain access- to the Security Patch Matrix, select
the link for "The Security Bulletins Archive". (near the
bottom of the page) Once in the archive the third link is
to the current Security Patch Matrix. Updated daily, this
matrix categorizes security patches by platform/OS release,
and by bulletin topic. Security Patch Check completely
automates the process of reviewing the patch matrix for
11.XX systems. Please note that installing the patches
listed in the Security Patch Matrix will completely
implement a security bulletin _only_ if the MANUAL ACTIONS
field specifies "No."

The Security Patch Check tool can verify that a security
bulletin has been implemented on HP-UX 11.XX systems providing
that the fix is completely implemented in a patch with no
manual actions required. The Security Patch Check tool cannot
verify fixes implemented via a product upgrade.

For information on the Security Patch Check tool, see:
<http://www.software.hp.com/cgi-bin/s...arser.cgi/cgi/
displayProductInfo.pl?productNumber=B6834AA>

The security patch matrix is also available via anonymous
ftp:

ftp://ftp.itrc.hp.com/export/patches..._patch_matrix/

On the "Support Information Digest Main" page:
click on the "HP Security Bulletin Archive".

The PGP key used to sign this bulletin is available from
several PGP Public Key servers. The key identification
information is:

2D2A7D59
HP Security Response Team (Security Bulletin signing only)
<security-alert@hp.com>
Fingerprint =
6002 6019 BFC1 BC62 F079 862E E01F 3AFC 2D2A 7D59

If you have problems locating the key please write to
security-alert@hp.com. Please note that this key is
for signing bulletins only and is not the key returned
by sending 'get key' to security-alert@hp.com.


D. To report new security vulnerabilities, send email to

security-alert@hp.com

Please encrypt any exploit information using the
security-alert PGP key, available from your local key
server, or by sending a message with a -subject- (not body)
of 'get key' (no quotes) to security-alert@hp.com.

-----------------------------------------------------------------

(c)Copyright 2003 Hewlett-Packard Company
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
in this document is subject to change without notice.
Hewlett-Packard Company and the names of HP products referenced
herein are trademarks and/or service marks of Hewlett-Packard
Company. Other product and company names mentioned herein may be
trademarks and/or service marks of their respective owners.

__________________________________________________ ______________

-----BEGIN PGP SIGNATURE-----
Version: PGP 8.0

iQA/AwUBP6MACuAfOvwtKn1ZEQLRUgCgx98iFRzYrXd3IgjPBLtWTx 7KgwQAoNbE
aQptAwxgeRdC6qv5fIHBsVlb
=XtKA
-----END PGP SIGNATURE-----

--
Yours truly,
HP S/W Security Team
WTEC Cupertino, California


Return-Path: secure@cup.hp.com
Reply-to: security-alert@hp.com