Hi,
I've installed RH9 on my Evo N800v with no problems except my Wireless
Multiport Card is not detected. This is one of those modified USB
devices that attaches to the lid of the system. When I hit Fn+F2 to
enable the device I get the following message:

usb.c: USB device 6 (vend/prod 0x49f/0x33) is not claimed by any
active driver.

Surely at this stage there should be a RPM available for this?? Any
help in getting this going would be greatly appreciated.

Cheers,
Derek

Derek Hardiman wrote:
> Hi,
> I've installed RH9 on my Evo N800v with no problems except my Wireless
> Multiport Card is not detected. This is one of those modified USB
> devices that attaches to the lid of the system. When I hit Fn+F2 to
> enable the device I get the following message:
>
> usb.c: USB device 6 (vend/prod 0x49f/0x33) is not claimed by any
> active driver.
>
> Surely at this stage there should be a RPM available for this?? Any
> help in getting this going would be greatly appreciated.
>
> Cheers,
> Derek

Without any further info, I'm guessing you have a Prism2 based wireless
device:

Search for "0x49f/0x33" in google (without the quotes).

http://www.linux-wlan.com/linux-wlan/
http://www.goonda.org/wireless/prism2/

--

Mauriat
----------------------------
Remove 'NOSPAM' to email me.