We try to connect a HP Optical Jukebox (HP80ex) to a E10K Domain
(resp. for testing pruposes an UE 1).
To control the Jukebox the FileNET SW and the fnsod driver is used.
If we connect the HP directly with SCSI (SUN branded QLogic SCSI-HVDa
adapter), there is no problem.

The next configuration step is to connect the Jukebox to an ATTO FibreBridge
2300 and the FC Bridge will be attached via a QLogic QSB2340F FC-HBA (SBus)
to the host.
As far a the fnsod driver starts it scans for devcies mentione in
fnsod.conf.
If there is a response to the Inquiry Command on a specific target the SUN
will panic immediatly

We also tried to use an NetraT1 Server an attached an QLogic QLA2310F FC-HBA
to the Atto FC-Bridge and we could work fine with the Jukeboxes.

That means the SBus adapter configuration crashes and the PCI on works well,
allthough the same ISP2310 chip from QLogic is on both HBA's and the same
qla2300 driver for the HBA's is used..

Is there anybody out there who expierienced the same problem and could help
us solving the problem.

PS: I tried the crash configuration with a single MO Drive Sony RMO-S594 as
well - the result was the same as I attach the Jukebox.

Thanks in advance

Marko
--
---------------------------------------------------------------
Marko Rautenberg
Viasolution IT Prof. GmbH
Bahnhofstraße 82
15827 Dahlewitz
TEL: +49 33708933935
FAX: +49 33708933935
MAIL: rautenberg@viasolution.de
WWW: www.viasolution.de
---------------------------------------------------------------